Disconnect your telephone line from distribution point inside your house
Connect it to the input of splitter
Connect DSL modem in the splitter interface marked 'modem' with R-J11 connecter
Connect your telephone set in the splitter interface marked 'phone'
The computers are connected with RJ 45 or USB interface to connect to the DSL Modem.
Then create the PPPoE Dial Up connection.
Because ADSL can be used for broadband access and involves a wide range of multimedia services, you are recommended use a computer with such configurations :
Shall be equipped with the 10M/100M Ethernet adapter or USB 1.1. or higher interface
Shall support the TCP/IP protocol.
CPU above Pentium III, 128 M memory, 10 G hard disk, graphic accelerating adapter with above 2 M displays memory, audio adapter and sound box.
Operating systems can be Windows 98SE, Windows Me, Windows 2000 or Windows XP. For system configuration in the WEB interface, the browser of Internet Explorer V 6.0 or later.
If you need extensions, connect it after splitter only. (Important!)
